Decorative concrete resurfacing is the perfect solution if you’re looking for an easy, affordable way to breathe new life into your fading stamped concrete driveway.
Through decorative concrete resurfacing, you can improve the look of your outdoor space while keeping the decorative patterns of your stamped concrete driveway vivid.
In this article, we’ll cover all you need about decorative resurfacing and how to bring stamped concrete driveways back to life after they fade.
What Are Stamped Concrete Driveways?
Stamped concrete driveways can be made in various ways and have more advantages over other materials. With stamps and coloring agents, you can create low-cost copies of high-demand building materials like cobblestone, brick, natural slate, and flagstone.
Stamping and staining not only improve the curb appeal of your driveway but also increase its usability and safety. Get in touch with a decorative concrete resurfacing Los Angeles company if you want your paving to keep its beautiful color and strength for a long time.
How Does A Faded Stamped Concrete Look
Do you notice that your stamped concrete has lost its luster and looks cracked, botchy, and discolored? Then it’s time to bring it back to life. How fresh concrete looks is vital for more than just how it looks; it also makes the concrete last longer. This means you won’t have to worry about spending big bucks over time on repairs and maintenance.
Preparation Before Decorative Concrete Resurfacing And Rejuvenation
Here’s what you have to do to make the best concrete driveway possible:
Inspect the Stamped Concrete Driveway
Check your concrete driveway carefully for signs of wear and tear, like cracks in the sealant or discoloration from exposure to high or low temperatures. Pay close attention to any spots that might need extra help.
Prepare the Surface
Get rid of dirt, trash, and anything else that could stop the area from getting better. Use a garden hose to help clean your concrete driveway, then use a power washer to remove the stubborn dirt and grime.
Choose Your Finish
1. Refinishing
Once your old concrete floor is cleaned and prepped, it’s time to prime it with a primer and refinish it with new cement or grout. You only have to pour your cement mixture and use a trowel to even out the layers.
You can stamp it while it’s wet or waits to dry before scoring with a saw cutter to restore or create new grid lines. Note that you may only choose to resurface parts with cracks and discoloration.
2. Staining
After your new concrete has dried and is ready, you can add a pop of color. Different stains for concrete require various tools; some must be painted with a brush, some with a sponge, and others sprayed.
Reactive or nonreactive stains are available. Metallic salts in reactive acid stains can color cement paste. Nonreactive stains adhere to concrete, sand, and gravel.
3. Stamped Concrete Rejuvenation
Even if you don’t want to resurface the whole floor, you can start to remove the old sealer, re-stain, and re-seal it.
You can add highlights with an antiquing stain and apply a tinted sealer.
