When concrete cracks, there is no other way to save it than resurfacing. Concrete is a durable product that can withstand extended exposure to wear and tear. The appearance of signs of damaged or weak concrete triggers you to have concrete restoration. To prolong their existence would only shorten the flooring’s life span. concrete restoration
Spalling or flaking is a common sign that tells you the concrete is deteriorating. There are two main repair methods for concrete. This is resurfacing and overlays. For overlays, the materials commonly used are concrete stamps and pavers. These are techniques that pour concrete to existing concrete. The old slabs may be exhibiting damages.
Depending on the degree of flaws, there are specific ways to restore the concrete.
What are the common concrete problems?
First, be familiar with the common issues that appear on concrete floors.
Spalling. Spalling happens when large flakes of concrete start to appear. Flaking occurs when the flooring is exposed to too much pressure. Usually, rolling objects that are too heavy contact the surface many times.
Scratching. For most of its lifespan, the concrete will resist scratches and even massive impacts. But if it is exposed to particular heavy objects more often than necessary, it will acquire unwanted scratches. Scratches can do minimal damage, but they create a significant effect on the aesthetic of the floor.
Crumbling. Crumbling concrete mostly happens when soft materials or weak sublayers are used. The critical factor is the installation process.
Now you can identify what can cause more significant problems, here are the ways you can apply restoration.
Popular Restoration Ideas on Floors
1- Repair with Resurfacing
When cracks already appeared, it’s now time for concrete resurfacing. This technique allows you to keep your old slabs on the floor. This also saves you from costly replacement. When concrete acquired larger cracks, pouring a mix of fresh concrete will help restore it.
2- Cover up with Coatings
Another way you can restore a polished flooring is by applying coatings. Some materials are made of modified polymers, like resin or epoxy. They harden on the surface with the toughness of concrete. This is a quick way to restore a seamless appearance to a surface when damaged with stains.
3- Stamps and Overlays
Other forms of damages like discoloration, scaling, and chipping can be covered with stamps and overlays. Overlays are poured concrete over old concrete. This technique restores the strength and flawless look of the footings found in your exterior for outdoor flooring.
4- Washing the Surface
You can simply deep wash the surface, especially if the damage is only minor. Stucked stains can be hard to remove with simple mopping. It might stress you out cleaning and decided to perform resurfacing or maybe wanting to replace the whole flooring.
Try to deep wash the concrete first. A pressure washer can do the trick. You’ll be surprised how polished the floors can come out after this. Then, you can cover with concrete sealers to protect it from now on.
When your floors start to surface typical scaling or tiny thin cracks appear, you can apply a quick remedy to prevent further damage. Acrylic sealers help restore the strength and density of the surface.
Staining or acid- washing can also be a way to restore concrete. If you need to recover a bare cement’s natural appearance and just want a clean slate to start with on the floors, applying the acid-satin is the best solution.