Installing a stamped concrete overlay may be a simpler process than installing brick or stone but it still involves a complicated process that needs to be strictly followed. Although it is possible for a stamped overlay installation to be a DIY project, a professional installation is most recommended to ensure quality and because it comes with a warranty. Either way, here are the Do’s and Don’ts when it comes to stamped concrete.
Stamped Concrete Do’s
- Do make sure that the old slab is in good, stable condition before overlaying. Perform the necessary repairs and make sure it is clean. This will guarantee proper adherence and prevent any future problems.
- Do add expansion joints to prevent or control cracking. A professional installer can efficiently disguise the cut within the stamped pattern.
- Do choose a pattern that would be suitable for the rest of your property, not because it looks good in another person’s house. What works for one home may not work in others.
- Do have the stamped surface sealed. A stamped concrete sealer is meant to protect a concrete slab, whether plain or resurfaced. Concrete is very porous and the sealer will help seal off those pores and prevent anything from getting absorbed into the slab.
Stamped Concrete Don’ts
- Don’t skip the subgrade. More often than not, the subgrade is the main cause of cracks and sinking slabs. Having it properly compacted before anything else is a crucial step.
- Don’t forget the reinforcement. A steel or mesh is effective in keeping the slab in place and making the entire stamped concrete intact for years to come.
- Don’t skimp on material. Cutting down on the material will only set you up for future concrete issues and expensive repairs. Invest in a top quality material so you could enjoy your stamped concrete surfaces longer.
A stamped concrete project is not something you can just do on a whim. It requires careful planning and preparation. If you are using an overlay, the old slab must first be inspected and evaluated by a pro to make sure that it is eligible for resurfacing. Take your time in choosing a pattern and color. There is a wide range to choose from and you wouldn’t want to regret what you first chose once it has already been stamped on the concrete. Instead of doing a DIY, hire a licensed, experienced, and reliable stamped patio pro to ensure successful results. check out this next blog about epoxy garage floor preparations to see more of our flooring options!